Sound Cards


Your registration case number is: Prior to seeing physical storage i. It is possible that updates have been made to the original version after this document was translated and published. Repeat that commnd for each all device IDs desired. Get the latest Host Connectivity Guide for Windows – these is a section there that explains how to log on using a specific IP address.

Uploader: Shakabar
Date Added: 23 November 2004
File Size: 67.6 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 81978
Price: Free* [*Free Regsitration Required]

In summary, this occurs because the arraycommpath setting of 1 creates a virtual LUN 0 for communication with the storage system.

Driver needed during upgrade to r2 (DGC Raid 5 Scsi)

Friday, September 7, 1: Hi, We have 6 node hyper-v clusters running 20 vm. Scso, September 7, 4: Get the latest Host Connectivity Guide for Windows – these is a section there that explains how to log on using a specific IP address. Please provide additional feedback optional: We have 6 node hyper-v clusters running 20 vm.

Now you can add the multipath support for the speicifc IDs you want.

From a command prompt, issue the command “mpclaim -e” to display the vendor product ID string for the connected storage array. Support Knowledge Base From a command prompt, issue the command “mpclaim -s -d” and you should see that there are no disk present yet, as you haven’t gdc any. Look for the entry about half way down called Source IP: Sign in to vote.

Related Drivers  ZYAIR G 300 DOWNLOAD DRIVER

Anytime you have system presented to a storage group that does not have a lun at Host Id The key is to ensure you are not trying to do IO before you get the MP enabled.

There are only slight variations for other combinations.

EMC Community Network – DECN: OS and Powerpath not detecting LUN

High Availability Clustering https: I have installed naviagent 6. So if I were to be doing this, Devie would evict a node from the cluster sounds like you have plenty of room with six hostsand set up the MPIO on that host, then join the node back to the cluster. Remove From My Forums.

Set default language Do you wish to save this as your future site? Now, the only thing about this is that I have never tried this after I had built a cluster. The agent then communicates through the storage device.

When I removed it from device manager it disappears under disk manager too. A SCSI-3 SCC-2 term defined as “the logical unit number that an application client uses to communicate with, configure and determine information about an SCSI storage array and the logical units attached to it.


Somewhat weird since I have PP. However, Powerpath does not detect anything at all.

Drivers >>> DGC RAID 5 SCSI Disk Device driver

It is visible to a host, regardless of the operating system, when the Arraycommpath setting is enabled for an HBA initiator and that initiator does not see a physical LUN with an address of 0.

Tuesday, September 11, 4: Also, check the color of the icon on the dyc left side – it should be green – which means logged in, registered and in a storage group.

You may also refer to the English Version of this knowledge base article for up-to-date information. When I reboot the hardware wizard pops up and rakd me to install multi-path support software. Please consult EMC support prior to making any changes.

Go to original post. I did remove another lun from storage before rebooting. If you require immediate assistance, please call us and we would be happy to assist.